how much does it cost to repave a driveway

how much does it cost to repave a driveway

5 hours ago 5
Nature

The cost to repave a driveway varies widely depending on factors such as the size of the driveway, the materials used, labor, demolition of the old surface, and any additional features or site preparation needed.

Typical Cost Ranges

  • In the US, repaving a driveway generally costs between $1,400 and $12,100 , with an average around $6,800 for a standard-sized driveway (about 400-600 sq ft)
  • Costs per square foot typically range from $7 to $14 , including materials and labor
  • In the UK, driveway resurfacing costs range from about £60 to £120 per m² , depending on material (e.g., gravel at the lower end, resin-bound at the higher end)

Cost by Material (US Estimates)

Material| Cost per sq ft| Approx. Cost for 400 sq ft
---|---|---
Asphalt| $7 – $13| $2,800 – $5,200
Concrete| $8 – $18| $3,200 – $7,200
Brick Pavers| $10 – $30| $4,000 – $12,000+
Gravel| $1 – $3| $400 – $1,200
Stamped Concrete| $12 – $18| $4,800 – $7,200
Paving Stones| $15 – $60| $6,000 – $24,000

Materials like brick, pavers, and stone are more expensive due to higher installation costs

Additional Cost Factors

  • Demolition and removal of old driveway: $1 to $6 per sq ft depending on material, typically $1,000 to $3,000 total
  • Driveway size and shape : Larger or irregularly shaped driveways increase costs
  • Site preparation : Grading, drainage installation, or landscaping can add $1,000 to $2,500 or more
  • Permits : May cost between $50 and $500 depending on local regulations
  • Additional features : Heated driveways, alarms, or special finishes increase costs

Summary

  • For a typical 400-600 sq ft driveway, expect to pay roughly $2,800 to $8,000 depending on material choice and prep work.
  • Asphalt and concrete are common, mid-range options.
  • Gravel is cheapest but requires more maintenance.
  • Brick and pavers are premium options with higher upfront costs.
  • Demolition and site prep can add significantly to the total.

This wide range reflects the many variables involved, so obtaining local quotes based on your specific project is recommended for accuracy

Read Entire Article