how to enable tpm 2.0

how to enable tpm 2.0

5 hours ago 4
Nature

To enable TPM 2.0 on a PC, the typical process is as follows:

  1. Restart the PC and enter the BIOS/UEFI settings by pressing a key like F2, Delete, or Esc during startup (the exact key depends on the motherboard manufacturer).
  2. In the BIOS menu, navigate to the Security tab or a section related to Trusted Computing or Advanced settings.
  3. Look for a setting named TPM, Intel Platform Trust Technology (PTT) for Intel CPUs, or AMD CPU fTPM for AMD CPUs.
  4. Change the TPM setting from Disabled to Enabled.
  5. Save and exit the BIOS settings (usually by pressing F10).
  6. Boot into Windows, then check TPM status by pressing Windows Key + R, typing "tpm.msc" and confirming that TPM is enabled and version 2.0 is active.

In Windows 11, a shortcut to access BIOS is via:

  • Settings > System > Recovery > Advanced startup > Restart Now
  • Then navigate Troubleshoot > Advanced options > UEFI Firmware Settings.

It is important to follow the exact instructions for the specific motherboard or PC model, as BIOS interfaces can vary. Consult the PC or motherboard manufacturer’s official guide if uncertain. Improper BIOS changes can cause issues, so proceed with caution and backup important data if necessary. This procedure enables TPM 2.0 which is essential for Windows 11 and improving system security.

Read Entire Article