To increase shower water pressure, you can try several effective methods:

• Clean the shower head: Mineral deposits and limescale often clog the shower head holes, reducing water flow. Remove the shower head and soak it in vinegar overnight, then scrub with a toothbrush to clear buildup

• Remove or adjust the flow restrictor: Many shower heads have built-in flow restrictors to save water, but these can limit pressure. You can remove or modify the restrictor to improve flow

• Check for kinks or leaks in hoses and pipes: Flexible shower hoses can develop kinks or blockages that reduce pressure. Inspect and straighten hoses and fix any leaks in plumbing to restore full flow

• Adjust the pressure-reducing valve (PRV): If your home has a PRV near the main water supply, you can increase pressure by loosening the locknut and turning the adjustment screw clockwise. Aim for 45-60 PSI for optimal pressure

• Install a shower pump: If your shower is far from the main water source or pressure is inherently low, a shower pump can boost water flow by increasing the force before it reaches the shower head. This usually requires professional installation but is a highly effective solution

• Replace the shower head: Switching to a smaller or high-pressure shower head can improve water pressure. Some newer designs are specifically made to enhance flow even with low pressure

• Check water valves: Ensure all water valves in your plumbing system are fully open, as partially closed valves can reduce pressure

These steps range from simple DIY fixes like cleaning and adjusting shower heads to more involved solutions like installing pumps or adjusting home plumbing valves. Start with cleaning and checking for blockages, then consider a pump or valve adjustment if needed