Materials Needed

Use 2.5-inch or wider wired ribbon for a big bow (about 12 feet for loops, 3 feet for tails, 4 inches for center wrap), sharp scissors, zip tie or pipe cleaner, and optional chenille stem for attachment. Wired ribbon holds shape better than non-wired types.

Step-by-Step Instructions

Start by cutting the ribbon: 12 feet for the main bow, 3 feet for tails folded in half, and 4 inches for the center knot. Form loops with the main piece by creating an initial loop, twisting the center, then adding 3-4 loops per side (7-8 total twists), alternating sides for symmetry. Pinch the center tightly, secure with a zip tie or pipe cleaner twisted around it, trim excess, and attach folded tails to the back center.

Shaping and Finishing

Fan out loops evenly, adjust wire edges to fluff the bow, and dovetail tails by folding and cutting diagonally for a layered look. Cover the center with the small ribbon strip tied around it, then trim tails to desired length. Attach to wreaths using a chenille stem wired through the back before securing.